Home
Request a Quote
Warranty Information
Home Owners Guide
Troubleshooting
Contact

FC40 Return Grille Filter
Electronic Air Cleaner F300/F50 Pre-Filter
Electronic Air Cleaner F300/F50 Post-Filter
F100/F150/F-25 Media Air Filter Replacement
Hepa F500 Filters


Honeywell - FC40 Return Grille Filter

Application: Whole House. Mounts in most return filter grilles.
Filter type: 4-inch media filter, cartridge style
Efficiency: Provides high efficiency alternative to one-inch filter.

MERV 8
15% efficient at micron size 0.3 83% efficient at 10 microns

Air Flow Capacity: 1200 cfm
Replace filter every 12 months or more often if filter appears dirty enough to block airflow through heating/cooling system.
* Shipping weight based on dimensional UPS charges, not actual weight

Honeywell FC40R1078 Return Grille Filter
Honeywell Electronic Air Cleaner F300/F50 Replacement Pre-Filters

Honeywell Electronic Air Cleaner
Replacement Pre-Filters (aluminum/wire-mesh)
Fits Models: F50A, F50F, F50E, F300

Single Filter: Double Pack: Note: These dimensions match to the duct opening or cabinet opening - please check

Honeywell F300/F50 Aluminum Prefilters 209989 IMPORTANT! Cleaning the Pre-Filters
To make sure you are getting the best performance from your air cleaner, make sure you clean the pre-filters regularly - every 1 to 6 months depending on your lifestyle (such as number of family members, pets, smoking, cooking, woodworking, etc).

Vacuum the pre-filters or brush, or soak it in a tub. Do NOT wash the pre-filter in the dishwasher or car wash.

Make sure the pre-filters are dry before sliding them back into the upstream prefilter guides. If the prefilters are still wet when you put them back in, the neon light may not come on and you may hear arcing. If arcing happens turn the unit off for 2-3 hours or until prefilters are dry.

Honeywell Electronic Air Cleaner F300/F50F Replacement Post-Filters

Honeywell F300/F50F Replacement Post-Filters 50000293-001 (16 x 20)

Honeywell's new post-filters have been proved to add 8-10% more efficiency at the smallest micron channel (0.3-1 microns), while keeping added pressure drop at a minimum. This is important because if there is too much pressure drop within the HVAC system, the equipment must work harder to keep the house comfortable. The new post-filters are made from a new exclusive Honeywell technology. Post-filters have an antimicrobial coating that protects against bacteria and fungal growth on the filter. Although they look very porous, they are very efficient at removing particles from the air when combined with an F300 or F50. A significant electrostatic charge is created throughout the filter that attracts airborne particles like a magnet. NOTE: POST-FILTERS CANNOT BE WASHED AND RE-USED. The electrostatic charge in the post-filter will dissipate if washed. Honeywell recommends that post-filters be replaced approximately every six months. The post-filters will fit into any Honeywell F50 or F300 Electronic Air Cleaner. They will elevate the performance of your air cleaner's filtration efficiency in capaturing bacteria, smoke, particles, mold spores and other fungi. Insert the media post-filters on the downstream side of the cabinet in the guide provided. (The metal mesh pre-filters are on the upstream side of the cabinet in the guide provided.) The post-filters are sold in a pack of two. NOTE: THESE POST-FILTERS WILL ONLY FIT IN MODELS F300 AND F50F. THEY WILL NOT FIT IN F50E, F50A, OR F52E.

Honeywell F300/F50F Replacement Post-Filters 50000293-002 (16 x 25)

Honeywell's new post-filters have been proved to add 8-10% more efficiency at the smallest micron channel (0.3-1 microns), while keeping added pressure drop at a minimum. This is important because if there is too much pressure drop within the HVAC system, the equipment must work harder to keep the house comfortable. The new post-filters are made from a new exclusive Honeywell technology. Post-filters have an antimicrobial coating that protects against bacteria and fungal growth on the filter. Although they look very porous, they are very efficient at removing particles from the air when combined with an F300 or F50. A significant electrostatic charge is created throughout the filter that attracts airborne particles like a magnet. NOTE: POST-FILTERS CANNOT BE WASHED AND RE-USED. The electrostatic charge in the post-filter will dissipate if washed. Honeywell recommends that post-filters be replaced approximately every six months. The post-filters will fit into any Honeywell F50 or F300 Electronic Air Cleaner. They will elevate the performance of your air cleaner's filtration efficiency in capturing bacteria, smoke, particles, mold spores and other fungi. Insert the media post-filters on the downstream side of the cabinet in the guide provided. (The metal mesh pre-filters are on the upstream side of the cabinet in the guide provided.) The post-filters are sold in a pack of two. NOTE: POST-FILTERS WILL ONLY FIT IN MODELS F300 AND F50F. THEY WILL NOT FIT IN F50E, F50A, OR F52E.

Honeywell F300/F50F Replacement Post-Filters 50000293-003 (20 x 20)

Honeywell's new post-filters have been proved to add 8-10% more efficiency at the smallest micron channel (0.3-1 microns), while keeping added pressure drop at a minimum. This is important because if there is too much pressure drop within the HVAC system, the equipment must work harder to keep the house comfortable. The new post-filters are made from a new exclusive Honeywell technology. Post-filters have an antimicrobial coating that protects against bacteria and fungal growth on the filter. Although they look very porous, they are very efficient at removing particles from the air when combined with an F300 or F50. A significant electrostatic charge is created throughout the filter that attracts airborne particles like a magnet. NOTE: POST-FILTERS CANNOT BE WASHED AND RE-USED. The electrostatic charge in the post-filter will dissipate if washed. Honeywell recommends that post-filters be replaced approximately every six months. The post-filters will fit into any Honeywell F50 or F300 Electronic Air Cleaner. They will elevate the performance of your air cleaner's filtration efficiency in capturing bacaterial, smoke, particles, mold spores and other fungi. Insert the media post-filters on the downstream side of the cabinet in the guide provided. (The metal mesh pre-filters are on the upstream side of the cabinet in the guide provided.) The post-filters are sold in a pack of two. NOTE: THESE POST-FILTERS WILL ONLY FIT IN MODELS F300 AND F50F. THEY WILL NOT FIT IN F50E, F50A, OR F52E.

Honeywell F300/F50F Replacement Post-Filters 50000293-004 (20 x 25)

Honeywell's new post-filters have been proved to add 8-10% more efficiency at the smallest micron channel (0.3-1 microns), while keeping added pressure drop at a minimum. This is important because if there is too much pressure drop within the HVAC system, the equipment must work harder to keep the house comfortable. The new post-filters are made from a new exclusive Honeywell technology. Post-filters have an antimicrobial coating that protects against bacteria and fungal growth on the filter. Although they look very porous, they are very efficient at removing particles from the air when combined with an F300 or F50. A significant electrostatic charge is created throughout the filter that attracts airborne particles like a magnet. NOTE: POST-FILTERS CANNOT BE WASHED AND RE-USED. The electrostatic charge in the post-filter will dissipate if washed. Honeywell recommends that post-filters be replaced approximately every six months. The post-filters will fit into any Honeywell F50 or F300 Electronic Air Cleaner. They will elevate the performance of your air cleaner's filtration efficiency in capturing bacteria, smoke, particles, mold spores and other fungi. Insert the media post-filters on the downstream side of the cabinet in the guide provided. (The metal mesh pre-filters are on the upstream side of the cabinet in the guide provided.) The post-filters are sold in a pack of two. NOTE: THESE POST-FILTERS WILL ONLY FIT IN MODELS F300 AND F50F. THEY WILL NOT FIT IN F50E, F50A, OR F52E.

High Efficiency Antimicrobial Postfilter Make Honeywell's Electronic Cleaners Even Better.

Add a Honeywell High Efficiency Postfilter to your Honeywell Wholehouse Air Cleaner and capture even more of the particles making your home's environment uncomfortable. Allergens, pollen, mold spores, bacteria, dust and other microscopic particles are captured by the antimicrobial postfilter within the air cleaner - before they reach the air you and your family breathe.

The Honeywell High Efficiency Postfilter features patented filtration technology that improves efficiency without reducing the air flow through your air cleaner, minimizing the strain put on your central air system.

Honeywell F100 / F150 / F-25 Media Air Filter Replacement

Honeywell Media Air Filters
Fits Models F150, F100, F25
Fractional efficiency: 15% (at 0.3 microns), 83% (at 10 microns)
Efficiency Rating: Merv8

Filters are 4-3/8 inches thick


Single Filter Honeywell recommends Air Filter Replacement at least twice per year. Preferably, at the start of each heating and cooling season.

2 Pack of Filters Honeywell HEPA F500 Filters

Honeywell F500 HEPA Replacement Filters
Peeks Heating & Air Conditioning . B 2926 8 Ave N . Lethbridge, AB . ph: 403.328-7335